- 22 December 2024
Review of Hydrogen Embrittlement and Interactions Between Hydroge...
This study conducted by Xinfeng Li et al. in 2024 addresses the critical issue of hydrogen embr......
- 22 December 2024
IIW FFS Recommendations for Fracture Assessment of Weld Flaws
This study conducted by M. Koçak et al. in 2008 presents a Fitness-For-Service (FFS) pro......
- 22 December 2024
Preventing Hydrogen-Induced Cracking After Welding of Pressure Ve...
Bulletin / Circular by Welding Research Council, Inc., 1976 Hydrogen-induced cracking occurs i......
- 22 December 2024
Review of Properties of Thermo-Mechanically Controlled Processed...
Bulletin / Circular by Welding Research Council, Inc., 1988 The subcommittee on Pressure Vesse......
- 22 December 2024
Stress-Based Fatigue Monitoring
Developed by the Electric Power Research Institute (EPRI) and first deployed in 1989, FatiguePr......
- 22 December 2024
Fracture Mechanics: Worked Examples
Compiled by J.F. Knott and P.A. Withey, this book focuses on the significant advancements in fr......
- 22 December 2024
Symposium on Intelligent Welding Manufacturing / IWM-Symposium 20...
The IIW Symposium on Intelligent Welding Manufacturing 2025 (IWM-Symposium 2025) is dedicated t......
- 22 December 2024
Effect of Nitrogen on Toughness and Strain Age Embrittlement of F...
This study, conducted by D. R. G. Achar et al., examines the effects of dissolved nitrogen in f......
- 22 December 2024
Corrosion and Corrosion Control Introduction to Corrosion Science...
Winston Revie and Herbert H. Uhlig This book serves as a comprehensive reference on the fundam......
- 22 December 2024
Experimental Studies On Creep-Resistant Solid And Metallic Wires...
This study by Hambal Iqbal et al. compares the use of cored and solid wires in variants of......
- 22 December 2024
Optimization Of Submerged Arc Welding (SAW) Parameters
This study by Manjarekar S.S et al. focuses on optimizing the parameters of the Submerged Arc W......
- 22 December 2024
Sensitivity Analysis Of Submerged Arc Welding Process For SA-516...
This study by N.D. Jadhav et al. focuses on determining the optimum weld bead geometry for......
- 22 December 2024
Optimization of Hardness of Weld In Submerged Arc Welding
This study, conducted by Rudra Pratap Singh et al. , focuses on optimizing the Submerged A......
- 22 December 2024
Effect of Submerged Arc Welding (SAW) Conditions on Properties of...
This study by Agata Wieczorska et al. examines the operating parameters and welding condit......
- 22 December 2024
Mechanical and Ballistic Performance in Welding High-Hardness Arm...
This study conducted by Uğur Gürol and colleagues investigates the mechanical and ballistic per......
- 22 December 2024
Analysis of Influence of the Welding Procedure on Impact Toughnes...
This study by Lozica Ivanovic investigates the effects of two different welding procedures on t......
- 22 December 2024
Experimental and Numerical Investigation of Friction Stir Welding...
Abhishek Tripath ve arkadaşları tarafından gerçekleştirilen bu çalışmada, AZ31 ma......
- 22 December 2024
Crack Initiation And Propagation Close To The Interface In A Ferr...
This study by J. Besson et al. focuses on an important industrial issue concerning the safety a......
- 22 December 2024
Corrosion of Weldments
Editor: J. R. Davis Welding is one of the most important processes in the manufacturing of met......
- 22 December 2024
Influence of Filler Material on the Microstructural and Mechanica...
This study by Ankur Bansod investigates the effect of different filler materials used in welded......
- 22 December 2024
Development Of Multi-Material Components Via Robotic Wire Arc Add...
This study by Gürol U et al. investigates the production of multi-material metallic parts......
- 22 December 2024
Influence of the N2 Atmosphere on the Operational Parameters and...
This study by Jorge Luis García-Jacomino et al. investigates the effects of nitroge......
- 22 December 2024
Revolutionizing Medical Implant Fabrication: Advances In Additive...
Yuhua Li et al. conducted a study examining the transformative potential of additive manufactur......
- 22 December 2024
Tensile Properties Variation Across the Dissimilar Metal Weld Joi...
This study by Gourav Rao investigates the tensile properties of dissimilar metal weld joints (D......
- 22 December 2024
Ni-Cr-Fe Alloy Brazed High Strength WC-Co/Low Carbon Steel Joint...
This study by Liu, S et al. investigates the application of a Ni-Fe-Cr alloy brazing method to......
- 22 December 2024
Optimization of Process Parameters for Weld Seam Analysis in Elec...
This study by Mishra, P et al. focuses on the optimization of weld seam properties using Electr......
- 22 December 2024
Experimental and Numerical Investigation of Mechanical Properties...
In this study conducted by Marwah Sabah Fakhri and colleagues, the resistance spot welding (RSW......
- 22 December 2024
Customization of Coefficient of Thermal Expansion in Functionally...
This study by Tonyali, B et al. investigates the spatial customization of the coefficient of th......
- 22 December 2024
Effect of overload on fatigue crack retardation of aerospace Al-a...
This study by S. Daneshpour et al. investigates the effects of overload on fatigue crack propag......
- 22 December 2024
Mechanical and Metallurgical Characteristics of Wire-Arc Additive...
This study by Prabhakaran B. et al. explores the production of high-strength low-alloy (HSLA) s......
- 22 December 2024
"Welding in the World" International Materials Joining...
The 69th issue of the Welding in the World journal has been released! This edition features sig......
- 22 December 2024
On The Experimental And Numerical Investigation Of Friction Stir...
This study by Abhishek Tripath et al. investigates the friction stir processing (FSP) of A......
- 22 December 2024
Alloy Steel – Properties and Applications
Editor: Eduardo Valencia Morales This book aims to bring together a series of articles that pre......
- 22 December 2024
A Study of the Structure and Properties of a Ti–Al–Mg/Ti-Based Me...
This study by P. A. Lazarev et al. investigates the effects of Self-Propagating High-Temperatur......
- 22 December 2024
Determination of the geometric parameters of the defects based on...
Pavel Doubek et al. conducted a study focusing on determining the geometric parameters of inter......
- 22 December 2024
International Journal of Engineering Research & Management Te...
Vivek Mishra's review article focuses on the production of high-quality metallic components......
- 22 December 2024
Effect of aging state on microstructure and properties of heat af...
This study by Yang Tao et al. investigates the effects of aging conditions on the microstructur......